Idle Talons

product

Green Lagoon Applegate Jade

fun, process, product, venuesLarkin HamiltonComment

Larkin cut this cabochon from a piece of applegate jade found by our family in southern Oregon. Some of the stone’s crust is included at the bottom of the cab and we keep seeing a frog-like face: a creature from the green lagoon!

The main frame is sculpted, wrapped and soldered from copper wire, and the back plate is fused and wrapped in argentium silver wire. I can't decide whether the back looks more like kelp or a Tolkien-esque tree! Plus, the stone glows brilliantly when backlit— this is a gorgeous piece from any angle!

This piece and much more will be featured this evening at Larkin's trunk show with Dancing Beads! Tune in at 7 to see what's new :)

Agate Bouquet

process, productLarkin HamiltonComment

This agate cabochon was a gift from a neighbor whose father did lapidary work in the 1960s. Its face is much flatter than most of Larkin's cabs and encapsulates a perfect still-life bouquet. Larkin thought that an oxidized copper frame without distracting embellishments would best highlight the beauty of the stone.

New Leaves!

musings, process, productLarkin HamiltonComment

Amidst all the recent exciting publicity, Larkin has been hard at work! Larkin rough cuts each of these stone leaves into its unique shape, then grinds and polishes the domed cabs to shiny perfection. A small hand-filed score at the tip of each leaf ensures the surrounding wires stay in place. Larkin then individually sculpts the stems and veins from copper wire and solder, pickles the result to cleanse it of any torch scorches, secures it to the intended leaf, dips the piece in liver of sulphur to oxidize it dark, and polishes to gleaming.

Each leaf is unique in more ways than one-- I've never seen another jeweler make anything like these! I think a fan said it best when they proclaimed these lovelies as "a pendant any hobbit would be proud to receive from Galadriel."

Crooked Mile Gallery Opening

fun, musings, product, venuesLarkin HamiltonComment

Our family attended the Crooked Mile Gallery opening last night in Phoenix, Oregon. The wine was flowing (Larkin had special permission to attend the 21+ invite-only event as a featured artist), the snacks were tasty, the art was spectacular, and there's something surreal about seeing Larkin's work just casually hanging out with all the big kid art!

If you're local, we highly recommend checking out this fun new artistic addition to our community!

Galactic Sodalite

musings, process, productLarkin HamiltonComment

Larkin's latest piece is this brilliant blue sodalite framed with a combination of wrapping and fusing in argentium silver. I said the stone in the wrap looked positively galactic with timey-wimey space waves and swirls and now I think Larkin is looking for a new copy writer. 😅 I didn't even point out that the blue in the stone was, in fact, TARDIS blue...

Vining Applegate Jade

musings, process, productLarkin HamiltonComment

Another piece using one of my favorite applegate jades found by our family! This particular swirly green stone has veins of translucence, but is mostly opaque. The picture with a gravel background was taken in direct sun and best shows the colors and patterns in the stone.

Oh yeah, and it's not *all* about the stone. 😅 Larkin set the cab in gleaming silver that has been shaped, fused, and wrapped into its final form. It's like an explosion of new growth! Measuring in at 6.6 cm long and 6 cm at its widest point, this is a gorgeous, bold statement piece.

Applegate Jade Tree

process, productLarkin HamiltonComment

We’ve been calling this stone “half-cooked” applegate jade— it’s a beautiful green base with orange-yellow speckles, and is translucent at the thin edges of the cabochon.

Larkin has been frustrated with how messy the back of a tree of life usually is since each branch needs to be individually tied off on the back of the piece. For this piece, Larkin soldered each of the 72 wire ends of the copper tree to the inside of the frame, allowing a more decorative back than usual. This took a Very Long Time and may or may not ever happen again.

The twisted rope and tire swing are constructed from argentium silver— and the swing actually swings from the branch!

Lavender Quartz Jellyfish

musings, process, productLarkin HamiltonComment

Larkin cut this uniquely shaped cabochon from a rose quartz stone with more flashy blue in it than most, which the folks at our local rock shop affectionately dubbed “lavender” quartz. The frame and curling tendrils are constructed with a combination of wrapping and fusing, resulting in a piece that is amazingly sturdy while capturing the dainty, ethereal spirit of a jellyfish! Even the back features whimsical underwater bubbles!

Those spiraling tendrils were a labor of love! Larkin flattened 14 gauge wire slightly with the rolling mill, softened them with the torch and rounded the ends, shaped the curls, trimmed them with the jeweler's cab, filed the ends to fit the edge of the wrap exactly, then fused them to the frame while keeping all fingers and toes crossed that none of the metal was going to slump. Just in case you were wondering.

Lapis Lazuli Marquise

musings, process, productLarkin HamiltonComment

Larkin cut and polished this marquise cab from a piece of lapis lazuli gifted by a fellow rock enthusiast at Crater Rock Museum. The long swirls of wrapped and fused argentium silver are lovely, and Larkin is considering turning this design on its side with beefier copper wire as a hair clip design. (I'll take one in applegate jade please, Larkin!)

Worried about it flipping over while being worn? Larkin has you covered: the back is gorgeous, too! This piece measures 8.5 cm long and and 1.8 cm at its widest point.

SKU0050-wildrose.1500.jpg
SKU0050-back.1500.jpg

Brick and Mortar, Yo!

venues, product, musingsLarkin HamiltonComment

Local rock shop Dragon Crystals invited Larkin to return as their October artist of the month! If you're local, this is a great chance to see some of Larkin's work in person. These good folks lost their Talent shop to last year's Almeda fire and have re-opened at 107 W 1st St in Phoenix. It feels so official to have a display in a local brick and mortar shop!

temp2.jpg
temp.jpg
temp3.jpg

Möbius Rings

fun, musings, process, productLarkin HamiltonComment

When I was a wee bairn of probably 3-4, my dad brought me a loop of paper and asked me to color one side red and the other side blue. I noticed it was twisted and pointed this out to him before getting down to work, but he said he didn't mind. I started on the blue side and had almost completely colored the whole thing before I realized I had, yet again, fallen victim to a mathematical practical joke.

Larkin made Möbius rings! That's right: rings that, through the awesome powers of mathematics, have only one face and one edge. The one on the left is a thinner comfort band ring, and the one on the right is a slightly thicker, squarer wire where Larkin polished the twist at the edge. These are copper prototypes (the final product will be in silver) and our family is split on which we prefer-- what do you think?

Side note: Larkin's mathematician grandpa is angling for Klein bottle earrings to go with these. ;)

temp.jpg
temp2.jpg

Local Quartz

process, productLarkin HamiltonComment

A "scarf" style wrap in argentium silver around a neighbor's tumble polished stone. This is a fun way to hang smaller stones that might not be suitable for cabbing! And with this piece, Larkin's current commissions are complete! If you have a project you'd like done before the winter holidays, now would be a good time to get in touch! 😉

SKU0048-leaf.1500.jpg

First Wholesale Order

musings, process, product, venuesLarkin HamiltonComment

<Phew> This little bin represents a ton of work! This is the first batch of Idle Talons stock purchased by a local art gallery-- we'll let you know when they open! If you or someone you know would like an Idle Talons display in your brick and mortar business, send us a message and Larkin will fill you in on wholesale pricing. Larkin has two commissions to finish up, then it's time for some well-earned creative free play.

temp.jpg

River Stone Scroll

musings, process, productLarkin HamiltonComment

Larkin cut this cabochon from a small stone our family found in the Applegate— before we knew how to spot applegate jade! 😅 It’s a beautiful grey-green with white and black striations, but we're not entirely sure what its actual mineral composition is. Larkin wrapped the unique cab in swooping silver scrollwork. I'm still really loving the wire doodles on the backs of Larkin's recent work!

We know we've been quieter than usual, but it's not because Larkin has been slacking! A local gallery owner is planning an Idle Talons display, so Larkin has been working hard on filling their large wholesale order... plus, summer market season is still in full swing. Larkin is enjoying this seasonal production work, but is looking forward to having a little more time to play with some new designs and techniques!

SKU0046-leaves.1500.jpg
SKU0046-back.1500.jpg