Wire Wrapping Demo

Local folks! Larkin was invited to demonstrate wire wrapping this weekend-- come check out all the purty rocks and say hi! Most of Larkin's designs require a fair bit of torch work these days, but they spent some time prepping torch elements so everything is ready to tie together. It's always fun to get a sneak peek at works in progress!

Silver Möbius Ring

Larkin has finalized their Möbius ring design! This solid silver ring takes the form of a Möbius strip— a shape having only one side and one boundary curve; the simplest non-orientable surface. Larkin shaped, fused, and polished this wearable mathematical figure so it is literally seamless. ;) The argentium silver band is a “comfort band” style, slightly rounded for a more comfortable fit.

These Möbius rings are 4mm wide and can be made to fit virtually any digit! Modeled here by Emile, Larkin's dad. :)

Bowling Pin Earrings

Here's a fun design that represents the rare confluence of Larkin's two favorite pastimes: jewelry making and bowling!

One of the bowling alley moms has been super supportive of us (as homeschoolers) trying to navigate the sometimes complicated world of high school bowling. Larkin designed these as a thank you for her as she helped us understand which hoops we needed to jump through and, even more importantly, where those hoops are located. 😅

These pins are argentium silver with copper bands around the necks.

Milestones, Website News, More!

Milestones, throwback... Wednesday, website news, a give-away... bear with me y'all!

Larkin is closing in on a milestone number of website orders and thought it would be fun to celebrate the occasion with a give-away! Warning: Larkin is a weird kid so their milestone number is not one of the obvious ones! 🤣 Larkin made this septarian piece at 13, back before they were old enough to cut their own cabs at the rock shop. This is not an original design and if Larkin was going to do it over they would use thicker gauge wire. That said, it's a pretty piece and a fun little chunk of Idle Talons history!

And here's the give-away: when that milestone website order is placed (could be this week, could take a couple of months) this pendant is going to be tucked into that package! So if there's something you've been eyeing it might be time to place an order-- who knows what could arrive at your door! ;)

Speaking of the website, we've made some changes! Larkin removed some older designs (including almost all the beadwork) to focus on the direction and feel of their current work. But don't fret! (🎵You don't know what you've got 'til it's gone!🎶) If something disappeared that you suddenly can't live without, shoot us a message and I bet Larkin will be willing to hook you up.

Water Lily Earrings

Remember the tiny, perfect lily flower on the recent water lily wrap? Now they're the stars of their own earrings! Larkin begins crafting these fabulous lilies by hand-cutting five layers of sheet metal silver into four petals. The five layers are staggered, petals shaped, and fused together, then finally a copper ball is set into the center. The 20 gauge hand-shaped ear wire is fused to the back. The copper center is untreated and will develop a natural patina over time.

Each step of torchwork is another opportunity for a layer of petals to rebel and slump-- on the first lily, Larkin worked the flower in halves and caused three different halves to slump before achieving the final lily. This pair was a little more cooperative (and, of course, Larkin had a bit more experience) and there were no start-all-over-catastrophic-failures.

These have been wear-tested and are quite robust, but some care should be taken when wearing them— loose knit garments may catch and snag on the petals.

Each bloom is about 1.3 cm in diameter and the total length of the earrings from the top of the ear wire to the bottom of the lily is about 2.3 cm.

There's Still Time!

RVGCM is open until 1:30 at the Ashland Armory!

Market Season

So... February always feels like a short month, but when the first Tuesday in March is March 1-- well, let's just say market season took us a bit by surprise this year! 😅 Local folks: Larkin will be back at the Rogue Valley Growers & Crafters Market first Tuesdays at the Ashland Armory... starting tomorrow! New hours this season: 9am-1:30pm. Larkin would love to see you there!

The last few days have been a blur of re-stocking, finding findings, making space on the board for new designs, stamping bags with the Idle Talons logo and lots of other preparations.

I also included a photo of one of Larkin's recent "wind-down" projects, pictured next to that sweet tiny silver lily before it was affixed to a wrap. Meet "Crumb," a baby amigurumi octopus crocheted with a single strand separated from 6-ply embroidery floss. This craft is recommended only for the young of eyes. ;)

Applegate Jade Lily Pad

Holy cow, people! Larkin's work is getting more sculptural all the time-- check out this perfect three-dimensional lily flower! And those cat tails! This round applegate jade cabochon is semi-translucent and full of deep, rich greens. Larkin framed it in a silver lily pad that has been wrapped, sculpted, fused, and accented with copper.

This piece is definitely more delicate than any other piece Larkin has made to date! Larkin is usually very careful to make sure their finished products are robust enough to stand up to daily wear, but this lily had to be made. ;) While the lily's petals are not dangerously sharp, the lily flower is very 3-dimensional and could easily snag on a loose-knit garment.

Vining Leaf Earrings

A new earring design! Larkin started this design with a single 20 gauge silver wire. The back of the ear hook becomes part of the design as it gracefully swoops behind the ear lobe. Larkin cut the delicate leaves from sheet metal and fused them into place. The copper leaves are untreated and can be kept polished bright or left to develop a natural patina.

Each earring measures about 2.6 cm long and 0.9 cm at its widest point.

New Leaf Earrings!

New leaf earrings are up! Larkin makes matching pairs by rough cutting the cabochons while two slabs are adhered together. Then the pairs are separated for the final doming and polishing.

These beauties are surprisingly light— even the large leaves weigh slightly less than a U.S. quarter! Each leaf hangs from a handmade ear wire. This collectionincludes "applegate jade" (bowenite), banded jasper, and serpentine. Two pairs of applegate jade are very dark to the naked eye, and glow a deep gemmy green when back-lit-- the second photo shows a pair with sunshine shining through it!

Someone's In The Details...

Sometimes this kid just can't leave well enough alone... 😅

Larkin couldn't stop thinking about a decorative bail to match this recent applegate jade piece, so finally sat down with the torch to make one. It's a pinch-style bail, but Larkin fused the tip to ensure the join was super secure. This involved removing the stone, doing the torchwork, pickling the piece to remove any scorch marks, re-polishing, and tying the stone back in again. But now it's perfect. ;)

Air Supply

Larkin had an order for an "air" pendant and realized it was time to re-stock. Avatar: The Last Airbender has been a huge hit with our whole family, and we heartily recommend it to anyone who loves cartoons! The show inspired three years of Halloween costumes for Larkin: Katara (Larkin is 9, guest appearance by their 7-year-old brother Finn as a Minecraft pig), Toph (age 10, probably still Larkin's favorite character), and Zuko (age 14).

Larkin translated the Avatar elements beautifully into wire!

Springtime Applegate Jade

Larkin just finished another piece from that hunk of applegate jade I just can't seem to stop waxing poetic about! 😅 This is not the highest gem-quality specimen, but our whole family loves the patterned swirls of lighter and darker green. Some areas of this stone are opaque, and some glow translucent green when back-lit.

Larkin spent a *ton* of time with the torch, sculpting and fusing elements of the frame so the final wrap would complement the feel of the stone. This piece has beautifully dainty details while feeling solid and sturdy in the hand. The stone in the middle photo is the one from which Larkin cut the cab. Thank goodness we still have about half-a-loaf-of-bread worth of the raw stone still uncut! (I'm pretty sure that's the accepted lapidary measurement scale...)

Cat Earrings

After a brief, long-awaited visit with grandparents (including our family's final Xmas celebrations 😅), Larkin is back at work! These sweet little feline companions are individually handmade and each has a unique personality. They are shaped from a single piece of wire, then fused or soldered to assure sturdiness and that they won’t snag. Available in copper (left), oxidized dark and polished, or argentium silver (right) polished and gleaming bright. Ready for adoption now!

Gallery Milestone

We recently had some pretty exciting news: The very first sale made by the Crooked Mile Gallery after they opened was a pair of Larkin's silver ribbon earrings! There's definitely something to be said for simple elegance and clean lines!

Rose Quartz Moon

A new wrap! And, dare I say, worth the wait! ;) Larkin cut this round cabochon from a slab of rose quartz that was cut diagonal to a band of clearer quartz. When domed and polished, the cab contains a distinctive moon shape! The stone's true color is best depicted in this picture, taken in full sun.

Larkin framed this piece almost entirely in silver with a contrasting arch of copper in the frame on the non-wrapped edge. The back is fashioned to suit the front, with a silver crescent moon and a curling vine with copper leaves. I keep thinking this piece evokes a fairy moon from an ancient illuminated manuscript!

Purrfect Earrings

Hi everyone! We took a bit of a social media break over the holidays, but will have a longer update soon about some exciting new additions to the Idle Talons studio. We hope this finds you happy and healthy in the new year!

Meanwhile, Larkin recently had a request for some wire cats and these silver line art lovelies turned out pretty charming!

Bowling For... Hummingbirds?

Larkin's top favorite bowling alley employee is an amazing guy. He takes donated equipment from more experienced bowlers and passes them on to kids-- it is *amazing* to see kids improve when they have their own custom-fit bowling balls and shoes! He knows *everyone's* names, loves the game, and wants everyone to succeed. He's not a jewelry guy, but Larkin found out his wife has a soft spot for hummingbirds and designed this sweet little pendant especially for her. Cheers to Ken!

Humboldt Chert Shell

Here's a new piece hot off Larkin's workbench! Larkin cut this beautiful blue-green cab from a chert stone our family found on the northern California coast. Larkin wanted the wrap to have an aquatic shell kind of feel, very appropriate for a stone formed by oceanic processes! Larkin shaped the frame with a combination of wrapping and soldering argentium silver. Larkin oxidized the wrap, then polished the exposed wire back to shining to give it a bit more depth and dimension.

Vining Rose Doublet

Hot off the workbench! This piece is currently exclusively available over at the Royaboya Handmade Bazaar! There's also a poll going in that group and Larkin might win a prize if you respond that we're the ones who sent you there! (Shameless, huh?)

This cabochon is a doublet that Larkin formed from a face of rose quartz backed by obsidian, resulting in a really unique grey-lavender tone. Wrapped in argentium silver roses and vines, the back is simple to showcase the translucence of the stones. The bail is designed so the cord will thread through the looping vines.

And, yes! That second picture is backlit-- the stones look So. Cool!